SecurityMan iCamDVR Manuel d'utilisateur télécharger pdf (Page 71)

70 | SecurityMan

TIPS

It is recommended to install SuperDVR software into a boot drive that boots up the operation system (normally C:). The saved recorded

les is recommended to be saved in other drives and/or partitions such as D:, G: etc..

A: Grey means Normal State. Yellow means Motion detection alarm. Blue means Video Loss. Teal means Manual Record

State. Green means Schedule Record State

Q: How does the dierent record mode work?

A: Users can set more than one record mode in Record setup but actually, there is only one valid record mode for a cer-

tain period.

The priority order of the record modes is: Motion Detection Record --> Manual Record --> Schedule Record

Q: How to setup recycle record mode in SuperDVR system?

A: Select the “Recycle” option in Basic Conguration. Multiple hard drives and/or partitions can be selected to save the

record les. It will not overwrite the former les until all the selected available drive storage spaces are less than the

alarm detection space setup in the Alarm Conguration.

If “Recycle” is not selected or enable and the drives storage spaces are less than the alarm detection space setup in

the Alarm Conguration, the alarm will beep and the hard drive usage indicator will turn red.

Q: Why setup PC Auto Reboot function, is it necessary?

A: Yes, this option is necessary to setup for automatic system reboot. Server at time will need to reboot for stability, as

continuously run server without restarting for days may result in instability, therefore it is necessary to setup automat-

ic reboot for every several day increments.

To setup PC Auto Reboot, go to Basic Conguration, input Windows auto login information; i.e. User name and Pass-

word (this is system login name and password), and then select PC Auto Reboot time/days interval. Windows will

then automatically reboot according to the setup time/days accordingly.

In cases of Windows system closed abnormally or power supply cuts o, SuperDVR software will automatically restart,

and keep the current settings.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 82 83

Pas de commentaire

SecurityMan iCamDVR Manuel d'utilisateur Page 71