SecurityMan AIR-ALARM II SERIES Manuel d'utilisateur télécharger pdf (Page 22)

* Please use screw (F) for mounting bracket (see page26)

Adding and Canceling Indoor Siren:

To Add:

Step 1: Connect the siren to an electrical power outlet and wait for 30 seconds.

Step 2: Press the “Learning” button located on the left side of the siren and the siren light will come on.

Step 3: Press the “

” button on the alarm host (remote control not applicable) to sound off the sirens and allow the

alarm to siren for 12 seconds.

Step 4: Disarm the alarm siren by using the alarm host keypad by pressing ESC/Disarm + programming password + ENT

Step 5: The alarm host will beep twice to indicate the indoor siren has been successfully disarmed and the light on

the siren will ﬂash 5 times to indicate the indoor siren has been successfully added.

To Cancel:

Step 1: Connect the siren to an electrical power outlet and wait for 30 seconds.

Step 2: Press and hold the “Learning” button located on the left side of the siren for 5 seconds, the light on the siren

will ﬂash once to indicate the indoor siren has been successfully cancelled.

Note: The alarm host can only learn 1 wireless device (Indoor Siren) at a time, multiple wireless sirens can be

added to the host. When adding wireless sirens, only operates using the alarm host keypad; do not use

the remote controllers to disarm in the process of adding the siren.

Wireless Smoke Alarm (SM-93)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Pas de commentaire

SecurityMan AIR-ALARM II SERIES Manuel d'utilisateur Page 22