SecurityMan Mini-AirWatch Guide de l'utilisateur télécharger pdf (Page 15)

C) Setting up the Camera

1) Place the camera at desired location.

2) Plug the power adapter or battery clip jack into the power jack at the

back of the camera.

3) Plug the power adapter to any DC outlet or plug a 9V battery to the

battery clip.

4) Check the Camera Frequency number of each camera at the back.

(The receiver will receive signal from camera’s corresponding fre-

quency and display in different channels. For example, Channel 1

on the TV/Monitor will display the picture from Camera 1 only).

D) Setting up the Receiver to match camera’s frequency

Press the Channel Switch button until the LED channel indicator light

match to the camera’s frequency (Camera frequency can be found at the

back of the camera).

CH4 CH3 CH2 CH1 SET

LED channel Indicator

Channel Switch

ZT-809T CMOS

DC8V 2.4GHz

NTSC

Power Jack

Camera

Frequency

Camera Back

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

SecurityMan Mini-AirWatch Guide de l'utilisateur Page 15