SecurityMan DVR-04 Guide d'installation télécharger pdf (Page 53)

Chapter 3: First-Time NT500 Offline System Installation & Setup

3 – 35

Notes3 The card number can be manually entered or

automatically populated if an office admin kit is being

used.

4 Enter the Issue code.

5 On the Cards tab, click Set PIN.

6 Enter a PIN number (up to 9 digits long) and confirm.

7 Click OK.

Note: If only PIN numbers will be used for access control, it is

important not to duplicate PIN numbers in the database. If

duplication occurs, there is no way to specifically identify who

gained access to an area. To avoid this potential issue, it is

recommended that all PIN numbers be assigned to a unique

card number. Since duplicate card numbers are not permitted

by the software, this will help prevent accidental PIN duplica-

tion. With a PIN only system, you must enter the PIN number

as well as a card using the same PIN number as the card num-

ber.

To define cardholder personal access details

1 Select the Personal Access tab.

2 Click the Profile 1 checkbox.

3 Select the time profile from the drop-down list.

Figure 3.19 Assigning a card and PIN

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

Pas de commentaire

SecurityMan DVR-04 Guide d'installation Page 53